JSR Architects Book an appointment

Drawing register

Drawings we provide

Every JSR project comes with a complete, numbered drawing set, from the first site study to the as-built record you keep after handover. This is what goes into it.

Stages
8
Drawing types
44

01 CD

Concept & design

How the home will work and look, agreed with you before anything is fixed.

  1. CD-01Site analysisOrientation, sun path, wind, access, levels and the rules that apply to your plot.
  2. CD-02Zoning & Vaastu planWhere each space sits, planned with Vaastu or Manayadi Sastram from the start.
  3. CD-03Concept floor plansLayout options for every floor, with furniture, so you can compare them.
  4. CD-043D massing & viewsThe form of the building in 3D, early enough to change it.
  5. CD-05Photoreal rendersFinal exterior views and key interior views.

02 AP

Approvals

Drawings in the format your local body or planning authority asks for, signed by your architect.

  1. AP-01Site plan with setbacksPlot boundaries, setbacks, road widths and coverage.
  2. AP-02Approval floor plansEvery floor, drawn to the authority’s rules.
  3. AP-03Elevations & sectionsBuilding heights, floor levels and building lines.
  4. AP-04Area statementBuilt-up area, FSI and coverage in the authority’s format.
  5. AP-05Parking & fire layoutsWhere the size or use of the building requires them.

03 A

Architectural working drawings

The drawings your contractor builds from: every wall, opening, level and finish.

  1. A-101Centre-line planColumn and wall centre lines, dimensioned for marking out on site.
  2. A-201Working floor plansEvery wall, opening and floor level, fully dimensioned.
  3. A-301ElevationsAll sides of the building with materials and finishes.
  4. A-401SectionsThrough stairs, double heights and the key spaces.
  5. A-501Door & window scheduleSizes, types, frames, glazing and hardware.
  6. A-601Staircase detailsRisers, treads, landings, railings and finishes.
  7. A-701Toilet & kitchen detailsWall elevations, tile layouts and fixture positions.
  8. A-801Flooring layoutMaterials, patterns and levels, room by room.
  9. A-901Terrace & waterproofingSlopes, rainwater outlets, parapets and waterproofing.
  10. A-902Facade & wall detailsHow the outer walls, cladding and sunshades are built.

04 S

Structural

Prepared with our structural engineer and coordinated with the architecture.

  1. S-101Foundation layoutFooting positions, sizes and depths.
  2. S-201Column layout & scheduleColumn positions, sizes and reinforcement.
  3. S-301Beam layoutsPlinth, lintel and roof beams for every floor.
  4. S-401Slab detailsSlab thickness and reinforcement.
  5. S-501Stair & water tank detailsStaircase, sump and overhead tank structure.

05 E / P / M

Electrical, plumbing & air-conditioning

Where every point, pipe and cable goes, planned before the walls are built.

  1. E-101Electrical layoutLights, fans, switches and sockets in every room.
  2. E-201Wiring & DB layoutConduit routes, distribution boards and circuits.
  3. E-301Low-voltage layoutData, CCTV, intercom and home automation points.
  4. P-101Water supply layoutInlets, tanks, pumps and pipe routes.
  5. P-201Drainage layoutChambers, slopes and the sewer or septic tank connection.
  6. P-301Rainwater harvestingCollection, filtration and recharge pits.
  7. M-101Air-conditioning layoutIndoor and outdoor units, drain and pipe routes.

06 ID

Interiors

Joinery, ceilings, lighting and finishes, detailed for the carpenter and the site team.

  1. ID-101Furniture layoutEvery piece placed and sized, room by room.
  2. ID-201Ceiling & lighting planFalse ceilings, coves and light positions.
  3. ID-301Wall elevationsEach wall of each room, with finishes and fittings.
  4. ID-401Kitchen & wardrobe detailsShutters, internal fittings, hardware and finishes.
  5. ID-501Material & finish scheduleLaminates, veneers, stone, paint and fabric codes.

07 L

Landscape

The outdoor spaces, drawn with the same care as the building.

  1. L-101Landscape layoutLawns, paving, planting beds and paths.
  2. L-201Planting planSpecies, positions and quantities.
  3. L-301Hardscape detailsSteps, edges, paving joints and outdoor seating.
  4. L-401Outdoor lighting & irrigationLight points, cable routes and watering lines.

08 AB

Handover

A record of what was actually built, for maintenance and future changes.

  1. AB-01As-built drawingsPlans and elevations updated to match the finished building.
  2. AB-02Services recordFinal routes of pipes, cables and ducts.
  3. AB-03Handover fileWarranties, product manuals and maintenance notes.

The exact set depends on your project’s scope; we confirm the drawing list in writing with our fee proposal. Sheet numbers shown are typical.

Start with a conversation

Tell us about your plot and what you want to build. A senior architect calls you back, usually within one working day.

Book an appointment